Lanner LVC-5000(N4) Manual de usuario descargar pdf (Pagina 21)

Board Layout

Chapter 3

Embedded and Industrial Computing

Dual USB 2.0 Port Connector #0 and #1 (USBB1)

Dual USB 2.0 Port Connector #2 and #3 (USBB2)

To erase the CMOS data:

Turn off the computer and unplug the power cord.

Move the jumper cap from pins 1-3 to pins 3-5. Keep 1.

the cap on pins 3-5(4-6) for about 5-10 seconds, then

move the cap back to pins 1-2.

Plug the power cord and turn on the computer.2.

Enter BIOS setup to re-enter data.3.

SIM Card Socket (SIM1/SIM2): SIM1 pairs with MPCIE1

and SIM2 pairs with MPCIE2.

Power-in with Ignition Control (PRJK1): A power

connector with power -ignition Control

Distant Power on/off Control (CN3)

LAN1~4 Ports (LANB1~LANB4): The LAN ports are

provided by Intel 82583V Ethernet controller whose

interface complies with PCI-e 1.1 (2.5 Ghz). It is capable of

PXE remote boot.

Pin No. Description

Fast Ethernet Gigabit Ethernet

1 TX+ BI_DA+

2 TX- BI_DA-

3 RX+ BI_DB+

4 -- BI_DC+

5 -- BI_DC-

6 RX- BI_DB-

7 -- BI_DD+

8 -- BI_DD-

Pin No. Pin Name

1 Ignition

2 GND

3 DC_VIN

1 2 3

1 2 3 4

5 6 7 8

Pin No. Pin Name

1 VCCUSB

2 USB0N

3 USB0P

4 GND

5 VCCUSB1

6 USB1N

7 USB1P

8 GND

Pin No. Pin Name

1-3 Normal (Default)

3-5 Clear CMOS

Pin No. Description

C1 UIM_PWR/UIM2_PWR

C2 UIM_RST/UIM2_RST

C3 UIM_CLK/UIM2_CLK

C5 GND/GND

C6 UIM_VPP/UIM2_VPP

C7 UIM_DAT/UIM2_DAT

C5 C7

C1 C3

Pin No. Pin Name

1 VCC5

2 GND

3 N/A

4 USBD11P

5 USBD10N

6 USBD11N

7 USBD10P

8 N/A

9 GND

10 VCC5

10 8 6 4 2

9 7 5 3 1

2 1

Pin No. Pin Name

1 Remote_Power_on

2 GND

Pin Signal Pin Signal

41 VCC3P3_PS 42 LED_WWAN2-

43 GND 44 LED_WLAN2-

45 RSV 46 N/A

47 RSV 48 V1P5_MPCIE

49 RSV 50 GND

51 RSV 52 VCC3P3_PS

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

Comentarios a estos manuales

Sin comentarios

Lanner LVC-5000(N4) Manual de usuario Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Lanner LVC-5000(N4)