Lanner LVC-5770 Manual de usuario descargar pdf (Pagina 21)

Board Layout

Chapter 3

Embedded and Industrial Computing

Switch

Protocol

SCT1 SCT3

RS-232 (default) 1-2 1-5, 2-6, 3-7, 4-8

(default)

RS-422 3-4 5-9, 6-10, 7-11, 8-12

RS-485 5-6 5-9, 6-10, 7-11, 8-12

J13, J14: Select COM1 and COM2 Pin9 Function (in

RS-232) respectively. The Ring indicator pinout of the RS-

232 COM port can be altered according to the following

jumper settings.

Digital Input and Output (MIO, J15): A DE-15 Male

Connector for 4 DI & 3 DO, 12V

Pin Signal Pin Signal Pin Signal

1 RIO_IN0 6 RIO_OUT0 11 EXT_POWER_ON

2 RIO_IN1 7 RIO_OUT1 12 IGN_IN0

3 RIO_IN2 8 RIO_OUT2 13 IGN_IN1

4 RIO_IN3 9 RIO_OUT3 14 GND

5 GND 10 GND 15 12V_OUT (1A)

Maximum input/output current for each port is

100mA

For all Input/

output pins:

Voltage Logic Register

Di: <0.8V

Do: <0.4V

Low 0

DI: 0.9 ~ 5V

Do:5V

High 1

The default BIOS value is 1 for DI and 1 for DO

Pin 11 is used for remote power switch.1.

Pin 6 is used for relay power switch.2.

Pin12 and pin13 can be used for DI wake-up 3.

function (Refer to the flow chart in Chapter 4 and

the ISM in Appendix A).

DC_in and out (CN4) : 9~36V DC power input and output

Integrated in a 4-pin terminal.

48V DC_IN for PoE Power Supply (CN3):

Optional Connector (CN1):

Pin No. Function

1-2 Supply +5V to

the Device

3-4 Supply +12V to

the Device

5-6 Ring-in (default)

J13 J14

15 11

5 1

Pin No. Function

1 P930V_IN

2 P930V_GND

3 GND_930V

4 P930V_OUT

Pin No. Function

1 GND

2 48V_IN

4 3 2 1

2 1

4 3 2 1

CN1

Pin No. Function

1 VCC12

2 GND

3 GND

4 VCC5

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 48 49

Comentarios a estos manuales

Sin comentarios

Lanner LVC-5770 Manual de usuario Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Lanner LVC-5770