Lanner LEC-2026 Manual de usuario descargar pdf (Pagina 25)

LEC-2026

25

2.2 The Front and Back Panel

This section describes the front and back panel of LEC-2026.

Figure 4 － LEC-2026 Front View

• Console Port: The console port cable connects LEC-2026 to the host PC

via a console cable. The Default baud rate is 115200

• LAN Connector: It requires an Ethernet RJ-45 cable to connect to

the port

z USB Port: Two USB type 2.0 ports are provided for easy connection of

USB devices. Besides these ports, there is also an internal header

for connecting USB interface cable.

LED Color Status

Description

Green

On Indicates when LEC-2026 power is switched

PWR

N/A Off No power connected

Yellow On Hard disk is being accessed

HDD

N/A

Off No Data is being accessed or no HDD

provided

Status It is a programmable LED. Lanner provides

sample codes for the status LED (refer to the

Driver/ Manual CD, under “LED Status” for

Amber Flash LAN link / active

Amber On Data is being accessed in 1G speed

Green On Data is being accessed in 100M speed

Giga

Ethernet Ports

Link/ACT &

Speed

N/A Off Data is being accessed in 10M speed

USB

Console

LED Status

Gigabit LAN Port 3, 4, 5, and 6

(capable of

PXE)

Gigabit LAN Port 1 and 2

(capable of LAN Bypass and PXE)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 66 67

Sin comentarios

Lanner LEC-2026 Manual de usuario Pagina 25